SeikiTech.com Sign Making Forum
August 05, 2020, 12:58:38 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: SMF - Just Installed!
 
  Home Help Login Register  
  Show Posts
Pages: [1] 2 3 ... 41
1  SeikiTech Vinyl Cutter / Seiki Cutters - T Series (SK-720T, SK-870T, SK-1350T) / Re: Orientation between what on screen and what on cutter on: February 14, 2020, 12:57:25 PM
Not all the vinyl cutters are the same. Your machine is not from us. You need to contact your machine seller for support.
2  SeikiTech Vinyl Cutter / Seiki Cutters - T Series (SK-720T, SK-870T, SK-1350T) / Re: Seiki T720 Inconsistant cutting on: February 13, 2020, 06:30:15 PM
Not all the vinyl cutters are the same. Your machine is not from us. You need to contact your machine seller for support.
3  SeikiTech Vinyl Cutter / Seiki Cutters - T Series (SK-720T, SK-870T, SK-1350T) / Re: seiki 720t very slow after new motherboard fitted on: February 13, 2020, 06:30:01 PM
Not all the vinyl cutters are the same. Your machine is not from us. You need to contact your machine seller for support.
4  SeikiTech Vinyl Cutter / Seiki Cutters - T Series (SK-720T, SK-870T, SK-1350T) / Re: SK720T Issue on: February 13, 2020, 06:29:35 PM
Not all the vinyl cutters are the same. Your machine is not from us. You need to contact your machine seller for support.
5  SeikiTech Vinyl Cutter / Seiki Cutters - T Series (SK-720T, SK-870T, SK-1350T) / Re: No communication SK1350T on: February 13, 2020, 06:29:01 PM
Not all the vinyl cutters are the same. Your machine is not from us. You need to contact your machine seller for support.
6  SeikiTech Vinyl Cutter / Seiki Cutters - T Series (SK-720T, SK-870T, SK-1350T) / Re: Windows 10 64 bit Plotterdriver SK-720T on: February 13, 2020, 05:54:36 PM
It needs a software to run the machine, not a driver.
7  SeikiTech Vinyl Cutter / Seiki Cutters - T Series (SK-720T, SK-870T, SK-1350T) / Re: Seiki 720T not seen on Win 10 on: February 13, 2020, 05:26:59 PM
You need to restart your computer after the COM3 shows in the Device Manager. 
8  SeikiTech Vinyl Cutter / Seiki Cutters - T Series (SK-720T, SK-870T, SK-1350T) / Re: Blade Offset Settings on: August 19, 2019, 03:30:34 PM
Our blade is 0.25mm offset. 0.01 inch is the correct setting.
9  SeikiTech Vinyl Cutter / Seiki Cutters - T Series (SK-720T, SK-870T, SK-1350T) / Re: SK-1350t on: August 19, 2019, 03:28:48 PM
If the ArtCut is bundled with your machine, likely, you purchased the machine from our competitors. Your machine is different than ours. The software and some parts may be compatible. You need to contact your seller to confirm. Thanks.
10  SeikiTech Vinyl Cutter / Seiki Cutters - T Series (SK-720T, SK-870T, SK-1350T) / Re: SEIKI SK720T 28" Vinyl Cutter Plotter Pt1 on: August 19, 2019, 01:18:11 PM
You can set it in your software. What software and version are you using?
11  SeikiTech Vinyl Cutter / Seiki Cutters - T Series (SK-720T, SK-870T, SK-1350T) / Re: Vinyl Line Up? on: August 19, 2019, 01:13:50 PM
https://seikitech.com/forum/index.php?topic=7087.0
12  SeikiTech Vinyl Cutter / Seiki Cutters - T Series (SK-720T, SK-870T, SK-1350T) / Re: no comms with plotter with usb or serial. on: August 19, 2019, 01:12:41 PM
What software and version are you using?
13  SeikiTech Vinyl Cutter / Seiki Cutters - T Series (SK-720T, SK-870T, SK-1350T) / Re: SK1350T - Carriage hitting wall for 5-10 secs on: June 11, 2019, 01:40:03 PM
Please try cutting an identical job. If the problem happens in the same spot, it could be the mother board problem. If the problem happens randomly, the problem could be the connection.
14  SeikiTech Vinyl Cutter / Seiki Cutters - T Series (SK-720T, SK-870T, SK-1350T) / Re: seiki 1350t cutter goes up when it should go down. Help! on: April 22, 2019, 01:01:17 PM
Please try revert the soldering points.
15  SeikiTech Vinyl Cutter / Seiki Cutters - T Series (SK-720T, SK-870T, SK-1350T) / Re: Have this Issue? Buttone Not working! on: March 29, 2019, 10:15:00 AM
We carry the I/O board, but we don't carry the IC.
Pages: [1] 2 3 ... 41
Powered by MySQL Powered by PHP Powered by SMF 1.1.13 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!