Sign Making Forum
January 24, 2020, 02:46:52 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: SMF - Just Installed!
   Home   Help Login Register  
Pages: [1]
Author Topic: Cutter starts to lift  (Read 1303 times)
Posts: 1

View Profile Email
« on: April 24, 2019, 06:28:27 AM »

So Iíve had my T series cutter for almost 10 years and I bought it used from a friend.  Itís been a great machine minus the user errors and learning curve.  The other day I cut a design like I have thousands of times and changed colors and started on next design.  When it was finished I started to weed it and realized there were some spots that werenít cut.  Iíve never ran into this issue so I tried a few more times and same result.  So I changed blades that didnít help so I started a design again and watched the cutter closely.  It was cutting as it should and then started not going down far enough to contact the vinyl.  So Iíve read through all the posts I could and there were some that were close but it seems like they were all new machines.  Iíve checked to make sure itís on the track, the track is clean, nothing seems loose.  Any help is appreciated.  Thanks
Pages: [1]
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.13 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!