Sign Making Forum
October 25, 2020, 06:08:56 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: SMF - Just Installed!
   Home   Help Login Register  
Pages: [1]
Author Topic: Change COM Port Number to below COM9 in Device Manager  (Read 9077 times)
Jr. Member
Posts: 60

View Profile
« on: August 11, 2010, 12:45:26 PM »

Change COM Port Number to below COM9 in Device Manager.
1. In Device Manager, under the Ports (COM&LPT) node, write down all COM#'s.  You will need them in Step 5.
2. Double click the COM# node you need to change. It will bring up a Properties window.
3. Select the Port Setting tab on the top of the Properties window.
4. Click the Advanced... button, and bring up an Advanced Setting window.
5. In the COM Port Number drop down list, select any number from 2 to 9, but not on the list you write down in Step 6.  Ignore the (in use) if all COM2 to COM9 are followed by the (in use).
7. Click the OK button to close the Advanced Setting and Properties windows.  Ignore any warning message.
8. then change the port number in production manager to the same # you used in device manager.
« Last Edit: August 11, 2010, 12:49:48 PM by Tepito » Logged
Pages: [1]
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.13 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!