SeikiTech.com Sign Making Forum
June 24, 2021, 10:50:11 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: SMF - Just Installed!
 
   Home   Help Login Register  
Pages: [1]
  Print  
Author Topic: Enable Blade(Knife) Offset Compensation in Flexi for small font or sharp corner  (Read 10443 times)
seikitech
Administrator
Hero Member
*****
Posts: 600


View Profile Email
« on: November 17, 2010, 04:18:10 PM »

Due to the blade offset, it will cut round corner in small font.  Flexi has the blade offset compensation setting to fix this issue.
1. Open the Production Manger.
2. Double click the Driver that with a Check Box in the front. (pm.jpg)
3. It will bring up a Default Job Properties.
4. Click on the last tab(Cut) in Default Job Properties window.(djp.jpg)
5. Check the Knife offset check box, the default value is 0.02 inch.  Base on the cutting result, change the value if need it.  Higher value means more compensation.


* pm.JPG (28.93 KB, 522x420 - viewed 97 times.)

* djp.JPG (30.16 KB, 401x645 - viewed 146 times.)
« Last Edit: August 15, 2012, 10:33:52 AM by seikitech » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.13 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!